Welcome to Motorcycles Guide
Victory Motorcycle Factory Article
. For a permanent link to this article, or to bookmark it for further reading, click here.
Restoration 101-On Your Motorcycle
from: JG MashinoTearing It Down
You’ve picked your bike out, made a few new friends, gathered together a few books to guide you and your garage is outfitted and ready to go, so now it’s time to…go on a drinking binge? Ah, no, that’s probably not a good idea; remember you’ve got this incredible piece of machinery just waiting for you to bring it back to life. Let’s tear it down.
Mindset
All through life your friends have told you how mechanically inclined you are, so this is a chance to really show your stuff. As you tear down you will slay many dragons along the way, but keep your chin up, have fun and later will feel the pride that comes with doing it yourself and see the fruits of your labor in the rebirth of the machine.
Session Time
Begin your first session without any set time. Work as much or as little as you like and take breaks along the way. One thing will lead to another and before you know it you’ll have a carcass of a motorcycle before you.
As you work along, there aren’t many guidelines to follow in terms of the order by which you break the bike down, other than what you are restricted to by way of how the bike is put together.
I like to start by removing the carburetors and doing the rebuild on them before taking the next part off the bike. Others may want to do the entire tear down, clean each part up and then rebuild. It’s up to you.
Nasty Bolts and Nuts
Along the way you may encounter some rusted bolts ands nuts. You may try turning them with as wrench, but before you try too hard, consider spraying them with rust solvent and coming back to them 6-12 hours later. In the meantime there’s always plenty of other things to do.
Getting Rid of Rust
Your mission as you tear down it to eliminate every spec of rust from the bike before any repainting or rebuilding occurs. To do this you will use a few different tricks.
Wire Brushes & a Scotch Pad
Wire brushes and abrasive pads are our friends. They work wonders at getting rid of rust and bringing a piece back to it’s original look. When you begin the process of rust removal start with a wire brush. If it’s a tight spot, use an abrasive pad like a 3M Scotchpad.
Abrasive pads are also finer than a metal brush, so if you’re dealing with a shinny surface use the pad instead of a brush.
Use water while you work as this allows you to move the brush easier and keeps the dust level down. Wipe the part with a rag now and then, inspect and keep scrubbing until you’ve eliminated the rust.
In some case you will be able to remove the discoloration. This is typical on frames and some aluminum parts.
For frames and other parts you will eventually paint, remove as much rust with a wire brush and abrasive pad. While working with the water feel free to add a little naval jelly to the mix. And don’t forget to wear your thick gloves during this process as Naval Jelly and skin don’t mix together well.
Finally use a rust to oxide conversion liquid (Rustoleum makes one) which will turn the rust to an oxide and allow proper bonding of the surface during the paint priming stages.
For shinny metals such as stator and clutch covers we’ll go another route. Begin by purchasing a few assorted buffers to fit your electric hand drill and a few different grades of jewelers rouge which come in sticks. These are compounds made to smooth and clean metal at high rotating speeds. Apply the rouge to the buffer and buff until you get the desired look.
One final destination for rust you will never be able to reach with your hands is the gas tank. Never fear, there is a product that will help you remove it all and protect it against rust in the future. It’s called Tank Kreem and you can get it at better motorcycle stores. Tank Kreem allows you to get the rust out of your tank and coat it with a polymer which will keep moisture off the metal of the tank in the future. Follow as directed and don’t be shy about letting the process take longer than expected. If you have a lot of rust in your tank it will take anywhere from 6 hours to overnight before it’s all loosened up.
Grab your tank and take it to the hardware store. There you can find corks that will fit the top opening and the petcock opening. While you’re there be sure to get some metal nuts and bolts to add in and shake around while it’s in process to help release rust deposits. Use a magnet on a wire to retrieve them after the second step of the process and test them first with the magnet to insure they are metal and not aluminum before inserting them into the tank.
In general clean every nook and cranny of the bike well and be generous with your water and solvents.
Bag It
As you break down the bike place corresponding parts into your plastic bags so you can keep them together as you clean and rebuild them. This will make it much easier to set up for your rebuild later too. Imagine a nice tidy row of bags and you just go one by one!
Photo It
If you’re short on visual images of the bike in various sections, say you lack a good repair book or the owners manual, use a camera as you break it down to photo areas that might otherwise leave you clueless on the rebuild.
Victory Motorcycle Factory News
AMA Pro Racing to Miller Motorsports Park - Ultimate MotorCycling | News and Reviews
 Ultimate MotorCycling | News and Reviews | AMA Pro Racing to Miller Motorsports Park Ultimate MotorCycling | News and Reviews Gillim's teammate Tomas Puerta (RoadRace Factory Yamaha) has come into his own as of late, finishing behind Dominguez in Race 2 at Infineon to grab the second podium this season for the fledgling team. Last year's Motorcycle-Superstore.com SuperSport ... AMA Pro Road Racing Brings the Battle to Miller Motorsports Park -- High Plains Drifting for WSBK at Miller Motorsports Park Rea Confident, Another New Circuit For Aoyama At Miller SBK |
Motorcycle-lovers roll into Hilltop Farm - Reminder Newspapers
 Reminder Newspapers | Motorcycle-lovers roll into Hilltop Farm Reminder Newspapers Pete Gingeras drove into Hilltop with a few others on their Victory motorcycles. Having just picked up his brand new Victory Vision touring bike that morning, he was eager to spend time with other bikers and “see a bit of history,” he said. |
McGill Looks for Hometown Victory at Inaugural Mountaineer Run GNCC - ATV Rider Magazine
McGill Looks for Hometown Victory at Inaugural Mountaineer Run GNCC ATV Rider Magazine Bowers Motorcycle/Coastal National Guard/Yokley Racing's Jarrod McClure has shown that he has the speed to run with the lead pack but the Pennsylvania boy continuously runs into mechanical issues on race day. McClure has put in two season-best fourth ... |
Old-Time Motorcycle Racers And Their Equipment - Motorcyclist Magazine
Old-Time Motorcycle Racers And Their Equipment Motorcyclist Magazine Through it all he had to strive for team work, employing the tricks of the trade, not only to bring for himself a victory which was expected of him by fans and his factory alike, but he also had to conspire to bring through his team mates. |
Near-record 40 SCORE Trophy Trucks Ready to Roar at 44th Annual Tecate SCORE ... - RacingWest.com
Near-record 40 SCORE Trophy Trucks Ready to Roar at 44th Annual Tecate SCORE ... RacingWest.com Class 25 and Class 24 lead the ATV classes so far with seven entries each and leading the Sportsman classes is the SPT M/C>450cc motorcycle class with 19 to date. Following his third victory in the last five races and second in three races this season, ... |
Waterford Speedbowl Wild 'n Wacky Wednesdays Results - WhoWon.com
Waterford Speedbowl Wild 'n Wacky Wednesdays Results WhoWon.com Coming out on top with victories on the night included Matt Pappa of Nassau, NY who raced to another Legends Cars win, Jon Porter of Canterbury in nailed the win in the Super X-Cars, Wayne Shifflett of Preston scored victory for the second time in 2012 ... |
Motus Reveals West Coast Dealers, Plans for Americade, Job Opening - Bikeland
Motus Reveals West Coast Dealers, Plans for Americade, Job Opening Bikeland With an eye for innovative products and a passion for motorcycling, we have continued to grow over the years and now proudly carry Victory, KTM, Honda, Yamaha and Suzuki. We are the oldest continually operating motorcycle dealership in the Northwest ... |